null Skip to main content

Sabfoil Full Carbon Kraken Plate Mount

Sabfoil

£199.99
(No reviews yet) Write a Review
Condition:
New
Shipping:
Calculated at Checkout

The CP02K Carbon Kraken Plate was born as an upgrade of its aluminum counterpart (P02K)

The weight of the plate has been reduced by over 200g (-30% compared to the aluminum version) and this reduces the overall weight of the mast by about 10%, while maintaining all the mechanical properties and robustness of the system!

The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.

The Kraken Plate also allows you to upgrade your set-up with the Quick Release System (Q01K), thanks to which you can assemble and disassemble your hydrofoil in seconds, without losing the configuration on the board.

Q01K (QUICK RELEASE) SOLD SEPARATELY

If you already use the Quick Release System with an aluminum plate (P02K), you will need to modify the setup in order to use it with the carbon plate (CP02K). Please, follow these instructions

Dimensions & Advanced specs
 
Weight [±5%] 485 g
Connection System Kraken Modular System
Material

Carbon

 
Full-Carbon Kraken Plate x 1CP02K
Hardware Kit Plate/Tuttle to Mast - Kraken Modular System x 1MH141
Foam Pads for Plate - Kraken Modular System x 1MH144
Countersunk Head Screws M8x30 x 4
Full-Carbon Kraken Plate x 1CP02K
Hardware Kit Plate/Tuttle to Mast - Kraken Modular System x 1MH141
Foam Pads for Plate - Kraken Modular System x 1MH144
Countersunk Head Screws M8x30 x 4
1 Year