RTM Auto Draining Scupper Bungs
Keep the water out of your boat with these scupper hole stoppers due to a 'non return valve'.
They allow water to drain from the scupper holes while moving forwards, but prevent it coming back up through when sitting still or drifting.
Makes for a drier & more comfortable paddling experience.
Sold as a pair of 2
The Large plug is ~38mm at the bottom flaring out to ~44mm at the top.
The medium plug is ~33mm at the bottom flaring out to ~36.5mm at the top.
The scupper hole sizes vary between kayaks. If the bung feels a bit loose or water pressure pushes it out of the hole, you can wrap some electrical tape around it to shim it out & make a good fit. If the bung is a bit too large, you can cut a 'V' shaped section into the side of it to allow it to better fit into the hole, but be very careful doing this, so as not the damage the non return feature.
