Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
24-7 Boardsports

Categories

Categories

Neil Pryde Glide Surf Foil

£749.00

Neil Pryde Glide Surf Foil

£749.00
Condition: New
Weight: 3.00 KGS
Shipping: Calculated at checkout
Quantity:
Share

Product Description

Glide Surf Aluminum Foil

GLIDE SURF creates a playground for building new surfing sensations. With a stable and fast take off no matter the conditions. This foil is easy to turn on the waves and allows for a very long gliding while speed is controlled. Pump from one wave to the next – and beat your own gliding record.

The GLIDE SURF foil comes in 3 different complete setups: Large, Medium and Small. In addition, GLIDE SURF Large is delivered with 2 Tail wings: Large & Small. It is suitable for a strapless wind foiling SUP with a mast foot rig connector and offers playful sessions for you to begin wind foiling, cruise around and catch waves. This foil allows for the use of the smallest sail sizes and barely hooking into the harness.

Our innovative Top Plate base system integrated in the Aluminum mast and perfectly blended fuselage offers the best connection for your surf and SUP boards. Plug and Play.

CONSTRUCTION

  • Mast: Aluminum
  • Wings: Pre-preg carbon layup with inner foam
  • Fuselage: Aluminium
  • Top Plate: Aluminium

DIMENSIONS:

SMALL SIZE

  • Mast: 65cm
  • Front wing span, Small: 64cm
  • Tail wing span, Small: 40cm
  • Fuselage length: 70.6cm

MEDIUM SIZE

  • Mast: 65cm
  • Front wing span, Medium: 75cm
  • Tail wing span, Small: 40cm
  • Fuselage length: 70.6cm

LARGE SIZE

  • Mast: 65cm
  • Front wing span, Large: 86cm
  • Tail wing span, Large: 51cm
  • Tail wing span, Small: 40cm
  • Fuselage length: 70.6cm

Features:

BASE SYSTEM

New CNC reinforced base construction. Two deep vertical tube connections to the mast for maximum strength, eliminating movement and offering perfect load transfer. Avoids vibration around the upper attachment area. GLIDE SURF foil comes with Top Plate base system.

BOLTS

x18 M8 titanium plated Stainless Steel bolts for maximum strength to weight ratio while preventing any corrosion problems. All using T-40 Torx drive, delivered with the product.

TAIL WING ADJUSTMENT

Delivers inverted thrust to balance the main wing and maintain easy control and stability. Foil is perfectly trimmed for average weight rider (75- 80kg) with tail in neutral position. Heavier riders, especially in light winds or during the learning process might prefer slightly more stabilizing force that a down tilted rear wing provides. Also, this down-angled position increases low-end power and lift of the foil. At the same time lighter riders, especially in strong wind conditions, may benefit from a drag and lift reduction by reducing the downwards tilt angle of the rear wing. Less down-angle will reduce the differential angle between the two wings and make the foil feel less draggy in the water, resulting in the fastest possible foiling sensation.

MAST

60 cm Aluminum mast. Optimized structure with two CNC female base system inserts ensuring maximum strength. Hollow construction to reduce weight combined with x3 vertical cross-ribs for maximum stiffness. Sanded mast trailing edge to avoid planning turbulence noise. Tempered, salt water corrosion resistant 6061-T6 aluminum.

FUSELAGE

Perfectly blended wing to CNC machined fuselage connection and integrated wind saddle providing minimum drag. Volume and weight of the aluminium used in fuselage is reduced by eliminating the forward protruding nose.

WINGS

GLIDE SURF pre-preg carbon layup with inner foam construction for maximum durability to weight ratio. Front wings span, Large: 86cm / Medium: 75cm and Small: 64cm. Tail wing span, Large: 51cm / Tail wing span, Small: 40cm.

GLIDE wings setup creates a natural tendency to roll into turns maintaining a nice balance during your ride. The Front wing is designed with a pronounced rounded Angle of attack and an elliptical bend shape. While flying, this thick leading edge on the front wing naturally closes the radius of your turn, tightening it. Far back, the angled down tail wings maintain a self-stabilizing roll allowing an easy turning performance. During this momentum, the GLIDE tail wing persists always want to come back to a flat position and cancelling the turning radius.

INTERCHANGEABLE TOP BASES

The Glide Wind comes with a top plate base system in the original packaging and can be interchanged with the following other Top Base systems:

INTERCHANGEABLE WINGS

The glide wind foil can be interchanged with the S, M, L sized wing set.

Product Videos

Product Reviews

Find Similar Products by Category