McNett Aquasure Repair Glue

£9.95
Write a Review
Condition:
New
Weight:
0.10 KGS
Shipping:
Calculated at Checkout

Urethane Repair Adhesive & Sealant the industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240 Cure Accelerator. 

Each pack of Glue comes with 28g tube of Aquasure, instructions, application brush, and protective gloves

DIRECTIONS FOR NEOPRENE REPAIR: 
Clean damaged area with Cotol-240 Cure Accelerator/Precleaner or solvent 
Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquasure to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. 
Most repairs reach full strength overnight (10 14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240. 
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4 beyond edge with Aquasure. Remove tape after full cure. 
SEAMS: Apply 1/16 thick bead overlapping seams edges by at least 1/4 . Apply with slight pressure to saturate fabric surfaces. 
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.