Bing

Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
24-7 Boardsports

Categories

Categories

JP 2017 Freestyle Wave 93 FWS Windsurfing Board

£1,549.00 £1,199.99
(You save £349.01)

JP 2017 Freestyle Wave 93 FWS Windsurfing Board

£1,549.00 £1,199.99
(You save £349.01)
Condition: New
Weight: 17.00 KGS
Shipping: Calculated at checkout
Quantity:
Share

Product Description

JP 2017 Freestyle Wave 93 FWS Windsurfing Board

SHIPPING TO UK MAINLAND DESTINATIONS ONLY - PLEASE CONTACT US FOR SHIPPING ELSEWHERE - WEIGHT IS A SHIPPING WEIGHT

These lively and exciting boards are the ultimate boards for medium to strong winds. They are super fast across the wind and also upwind. They would make excellent straight line freeriders only, but they aren’t, simply because they are too much fun to carve and jump. See a little wave and you’ll be inspired to launch high into the sky like a rocket with the boards remaining in total control until touchdown. See a flat section and you will want to go for your next, ‘most radical’ jibe – ever!

Yes, it’s in maneuvers where they really stand out: feeling like large wave boards they carve superbly whether you crank them hard or carve them smooth. Their reliable bite and grip in fast turns will motivate you to carve harder and harder on their thin, sharp rail into the next jibe or bottom turn.
Therefore the Freestyle Waves also qualify as JP’s fastest wave boards, suited for advanced riders with only little wave experience or for heavier riders or for those who sail in varying conditions.
Due to their speed it is easy to accelerate to ‘your’ perfect section of the onshore wave or side shore roller.

The short and compact boards offer sufficient stability and the well rounded dome deck ensures a very comfortable stance in the straps, no matter if they are mounted inboard for maneuvers or nearer to the rail for freeride performance.

The FWS models come with a single fin while the Pro Editions feature a thruster setup to excel in all wave conditions.

At home in all waters, these all-rounders offer an incredible wide range of use. They excel as freeride, freestyle, bump & jump and wave boards and no matter how you’ll use them, you’ll just simply have your best time on the water – easy!

TECHNICAL INFO:

LIMITED FINISH - LESS IS MORE

Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.

STORAGE

Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places !
Winter storage: non-freezing (constantly above +5 C).
Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.

AIR VALVE

We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!

NOSE PROTECTOR

  • Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.
  • Especially recommended for novices and everybody, who wants to protect the board nose.
  • The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.
  • The set consists of 6 pieces: 2 side parts (one left and one right), and 4 connections in sizes Small, Medium, Large and "Wave Slate".
  • By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.
  • This makes it an universal protector not only for JP boards but for most boards available on the market.

Product Reviews