This AFS foil is disassemble. The foil is made up of the following parts
1 x 95cm deep tuttle mast
1 x 94.5cm fuselage
1 x 900 front wing
1 x 240 rear stabilizer
The complete foil AFS WINDFOIL 2022 is moving towards a slalom – race program. Compared to our previous ranges, a glide optimization has been made in order to get even more performance while remaining accessible.
The TBAR (95 cm mast/94.5 cm fuselage) is geared towards riders looking for performance in freeride/freerace practice. It is in fixed TBAR.
The TBAR (100 cm mast/104 cm fuselage) – Ultra High Modulus construction. It is mainly intended for competitors or people doing up and down wind. It is in fixed TBAR.
The 240 stabilizer is a homogeneous stabilizer allowing you to sail in all light and strong wind conditions. With inertia and power, it will allow you to cross all the wind drops in the body of water.
The 200 stabilizer optimizes your performance to get more glide and speed. It is oriented towards a slalom/race practice.
This range is suitable for intermediate to expert level practitioners.
- Optimized glide
- Better upwind and downwind
- Wide range of use
- Made In France
- Full carbon
Front Wing Features
| 370 | 570 | 700 | 900 | |
|---|---|---|---|---|
| wingspan | 580 mm | 725 mm | 882 mm | 1000 mm |
| Surface | 370 cm2 | 570 cm2 | 700 cm2 | 900 cm2 |
| Aspect Ratio | 9.1 | 9.2 | 11 | 11.1 |
| Screw size | 25 mm | 25 mm | 25 mm | 25 mm |
| Full foil weight | 3.9 kg | 4 kg | 4.1 kg | 4.2 kg |
Rear Stabilizer
| 200 | 240 | |
|---|---|---|
| wingspan | 420 mm | 505 mm |
| Surface | 200 cm2 | 240 cm2 |
| Aspect Ratio | 8.8 | 12.6 |
| Screw size | 16 & 20 mm | 20 mm |
Construction
Made of pre-preg carbon in France, the foil is stiff and light. With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin during its manufacture. This guarantees a perfect ratio of epoxy and carbon, and represents the best quality process. Laser cut, then assembled in the form of a stack, the carbon fibers are then positioned in a mold which is mounted at high temperature, providing resistance and durability. From the machining of the molds to the dispatch, everything is managed in our company in France, allowing us to have a quality process and a guaranteed finish.
The set comes with three covers: TBAR, front wing and stabilizer. The screws are also included as well as the screwdriver to assemble the foil.
